Electric Lock Co404ICE


Security Lock with automatic relock, grade 7 anti-burglary certification

Electric lock with electromagnetic bolt, with automatic mechanical re-lock. Stainless steel face plate and strike plate INOX 40/10, stainless steel case, stainless steel and chromium plated bolt Ø18 x 38,5 mm and stroke 20mm, with spring latch which allows the automatic re-lock. The bolt is realeased (door lock) when the spring latch is pushed when the door's wing is aligned.

The automatic re-lock (bolt realease) is mechanical, without electrical impulse, designed against cables cutting.

Equipped with bolt and cylinder position sensors (*optional) and door open / closed. The lock requires power to unlock or may be manually opened through an european profile cylinder UNI 9570, momentary or permanent release. The lock will lock via spring action when not powered. The version 12V consumes 0.4A (start up current 2.2A), the 24V version consumes 0.2A (start up current 1.1A). The lock is continuously rated, is capable of up to 120 cycles per minute and over two million opening-closing cycles without any maintenance.

Available models: mortise mount either horizontal or vertical and surface mount. Recommended for doors, windows, access control systems, sliding doors, turnstiles. If equipped with control unit Co 273.20 (* Co 273.22), forms a basic system for access control.

Product features

MODEL

Co404 I

Co404 N

Mechanic shear strength
(non destructive)

12000 N

12.000 N

Mechanic shear strength
(destructive)

16000 N

16000 N

No. of bolts

1

1

Bolt diameter

18 mm

18 mm

Bolt stroke

20 mm

20 mm

Opening/closing speed
(complete opening/closure cycles): no. of cycles in 1 second

≥ 2 cicli

≥ 2 cicli

Nominal voltage

12 Vdc

12 Vdc

Permanent voltage

100%

100%

Consumption

5 W (cue
27 W)

5 W (cue
27 W)

Locking operation/method

by spring

by spring

Opening operation/method

electric

electric

IP rating

IP 509

IP 509

MOUNTING SPECIFICATIONS

The standard lock version is designed to be mounted either vertically or horizontally. To facilitate electric connection, it is recommended that the lock is installed in the frame, and the strike plate fixed to the door.

To ensure reliability of operation it is recommended that the door is fitted with a closing spring equipped with final brake adjustment to avoid door bounce. For alternative applications, a request must be made prior to order. To complete the installation of the electric security lock a European standard security key cylinder UNI 9570 is required. The cylinder is also required for the model with the handle.

Images

Downloads